Bevel Gear Machine OERLIKON SKM 1 # 7151
No longer available
Bevel Gear Machine OERLIKON SKM 1 # 7151
Location:Badajoz, Spain
Specifications
| Manufacturer | OERLIKON |
| Model | SKM 1 |
| Year | 1979 |
| Condition | Used |
| Stock Number | 7151 |
| High | 1.625 mm. |
| Long | 2,690 mm. |
| Width | 1,860 mm. |
| Module | 2.1 - 7.5 |
| Weight | 7,500 Kg. |
| Voltage | 220 / 380V. |
| Total power | 13 Kw. |
| Ø max gear | 320 mm |
| Rapid travel | 1.5 m / min. |
| Plongee course | max 20 mm |
| Tooth width max | 50 mm |
| Main motor power | 10 Cv. |
| Engine cooling power | 1.2 Cv. |
| Power forward engine | 2 Cv. |
| Power hydraulic motor | 2 Cv. |
| Cut in feeds, stepless | 0.04 - 25 mm / min. |
| Max. transmission ratio | 1: 9.5 |
| Motor power chip conveyor | 0.3 Cv. |
| Ø of spindle nose helpful | 130 mm |
| Outer cone distance approx. | 170 mm. |
| Clearance hole spindle pieces | 78 mm. |
| Swing around machine center axis | 90º |
| Spindle speeds in standardized steps | 40-250 rpm. |
| Spindle nose with short taper, inside | 140 mm |
| Spindle nose with short taper, outside | 85 mm. |
| Distance cone center / cutter head axis | 25 - 150 mm. |
| Adjustment range for hypoid gears (offset) | +/- 60 mm. |
| Max. crown gear ø at mean spiral angle of 30 ° | 320 mm |
| Distance cone center / workpiece spindle shoulder | 100 - 345 mm. |
| Distance cone center / cutter head spindle shoulder | 80 - 220 mm. |
| Roll cradle feeds in minutes of angle per cutter head revolution | 0.3 - 20 |
| Specification | Helical conical |